猫咪apk下载最新版

欢迎来到长沙市百锐固得机电设备有限公司! XML MapSitemapWelcome to Changsha Bairui Goode Mechanical & Electrical Equipment Co., Ltd.!

Couch Motor Service Hotline: 189-3213-5110

Changsha Bairui Gude Electromechanical Equipment Co., Ltd. generator sales, rental, maintenance, recycling

Popular keywords: Changsha new generator rental Changsha second-hand generator rental

Generator rental

How to deal with generator water

发表时间:2017-12-07 Article source : Couch motor manufacturersPublished time: 2017-12-07

When it is found that the diesel generator enters the water for other reasons, it should be handled as follows: When the diesel generator enters the water, it is found that if the generator is immediately shut down during operation, the stopped state is not allowed to start. Then the diesel generator is not allowed to start. Support the good things on one side so that the engine oil pan oil drain parts are in position.Unscrew the oil plug and pull the oil scale out of the water in the oil tank.

When the oil is released, the oil and water should be released to release some oil and oil. Remove the air filter, replace the new filter element and soak in the oil.
Remove the air intake pipe, exhaust pipe and muffler, and take out the water from the pipe. Turn on the decompression, swing the diesel engine to generate electricity, and observe whether there is water discharge at the water inlet and outlet. Install the intake pipe, exhaust pipe and muffler, add a little oil to the air intake, rotate the crankshaft several times, and then install the air filter. Remove the fuel tank, clean the oil and water, and check whether the fuel system is clean.
Drain the water from the water tank and water channel, clean the water channel, and pour fresh or boiling water into the water. Open the throttle and start the diesel engine. After starting the diesel engine, observe that the oil indicator rises, and listen to the engine making abnormal noises. Check all the engine components, Grinding sequence, idle speed, medium speed and high speed. Machine oil is released after grinding. Re-add new oil and start the diesel engine, and it can be used normally. Disassemble the generator, check the internal stator and rotor of the generator, and then reassemble and dry.

下一篇:没有了 Next: Nothing Next: No

everybody is watching

  • 发电机租赁必须对它的操纵规程有一定的认识
    Before starting, you should check whether the fuel volume of the fuel tank is rich, and there is no oil leakage in each oil pipe and the discussion area; whether the cooling system water is rich, clean and leak-free, and whether the fan belt is tight or not. The internal combustion engine and generator drive parts should be connected and trusted. The wires of the input line are well-insulated, complete and effective in all aspects. After starting, it should run at low speed for 3 to 5 minutes. After the temperature and oil pressure wheel are normal, the initial work can be done. The generator should be no different in the speed increase. Ring, the slip ring and commutator are well brushed, no jumping and sparking phenomenon. After the operation is stable and the frequency and voltage reach the rated value, power can be supplied to the outside.
  • 介绍柴油发电机组辨别冒烟颜色启动从预热开始
    Blue smoke, fire reason: It means that the engine is burning oil. There are three types of reasons: first, the piston ring goes opposite, and the oil comes in the cylinder; the second is the oil level of the oil pan of the atmosphere filter, which leads the ring. The height of the groove; Third, the gap between the duct and the valve stem is too poor. Expulsion idea: Adjust the piston ring so that the opening teeth of the ring are staggered 120 degrees or 180 degrees, and the opening teeth of the ring should avoid the piston pin hole and the side pressure is poor. Adjust the height of the oil level of the oil filter of the atmosphere filter below the height of the annular groove; if the clearance between the duct and the valve stem is too poor, replace the component and reduce the clearance. The normal mutual assistance clearance between the two is 0.0
  • 小负荷柴油发电机组在工作时有哪些故障
    In the power generation industry in China, we have been working hard, pursuing the concept of quality and service, and for the sake of customers, the full power generator chooses China and your generator is a professional housekeeper. At present, the diesel generator set maintenance market refers to damage inspection and routine maintenance. Two aspects: after maintenance refers to the failure of the diesel generator, there are problems with various accessories, such as replacing the generator or
  • 同步发电机一般常见问题的处理
    The diesel engine is working normally, but the generator fails to generate electricity or the voltage is very low. This may be due to the components associated with the generator, such as: the exciter is damaged, and the excitation voltage cannot be supplied. The excitation current is taken in. The rotor's dead center residual magnetism is weakened or declining. It will make the generator unable to generate electricity or the transmission voltage is extremely low. The right to respond is usually: use an appropriate DC voltage and directly connect to the excitation winding according to the polarity Magnetization. Carefully inspect the exciter and the cyclotron rectifier, find abnormal components or windings, and replace them for restoration. The generator's transmission voltage is unstable, and

Popular information